You spent good money on your Anker SOLIX power station. It's your backup during outages, your power source on camping trips, and your reliable companion at job sites. But every time you haul it out in the rain or toss it in the truck bed, you wince a little. One splash, one dusty worksite, one careless drop, and that investment takes a hit.
Generic cases don't fit right. They leave ports exposed or covered when you need them accessible. Some don't even protect against water. And the wrong accessory could void your warranty or leave your power station vulnerable when you need it most.
The Anker SOLIX C800X & C1000X Cover Bag solves this problem with a custom-fit design built specifically for your unit. This official Anker accessory delivers IP54 water and dust resistance, velcro port access so you can charge and discharge without removing the cover, and a dedicated compartment for your cables. It's the OEM protection your power station deserves.
The IP54 rating means this cover bag handles splashes, rain, and dust when fully closed. Open it up and you still get IP33 protection. Rubber feet on the bottom keep your power station elevated off puddles, wet grass, or muddy ground. This isn't marketing fluff. It's real-world protection for real-world conditions.
Here's what sets this bag apart from generic alternatives: velcro openings aligned with every port on your C800 or C1000. Need to plug in solar panels while it's raining? Open the velcro flap, connect your cables, close it back up. Your power station stays protected while staying functional. No more unzipping, removing, and re-bagging every time you need power.
High-grade rugged polyester stands up to repeated use. Throw it in your truck, carry it across a campsite, stack gear on top. The material handles abuse without tearing or wearing thin. The dedicated cable compartment keeps your accessories organized instead of tangled in a separate bag you'll inevitably forget.
See full specifications below for complete dimensions and compatibility details.
Not sure if this fits your specific model? Check the FAQs below or contact our power specialists for confirmation before you order.
Generic power station bags exist, sure. But they're built to fit a range of units, which means they fit none of them perfectly. Zippers sit in the wrong spots. Port access requires partial removal. The fit is loose or tight in all the wrong places.
The Anker SOLIX Cover Bag is engineered specifically for the C800, C800 Plus, and C1000 series. Every opening, every seam, every pocket aligns with your unit's actual design. That's the difference between an accessory that works and one that frustrates you every time you use it.
Anker backs this accessory with their reputation for quality portable power equipment. With millions of power stations sold worldwide, they understand what their customers need. This cover bag reflects that understanding with thoughtful details like the velcro port access system and rubber elevation feet that generic manufacturers simply don't consider.
| Spec | Value |
| Compatibility | Anker SOLIX C800, C800 Plus, C800X, C1000, C1000X |
| Water Resistance (Closed) | IP54 |
| Water Resistance (Open) | IP33 |
| Material | High-grade rugged polyester |
| Port Access | Velcro openings for all ports |
| Base Protection | Rubber feet for surface elevation |
| Storage | Dedicated accessory/cable compartment |
| SKU | A17Z4011 |
| Warranty | 3 months |
Yes, this cover bag is designed to fit the Anker SOLIX C800, C800 Plus, C800X, C1000, and C1000X portable power stations. The custom-fit design ensures proper alignment with all ports and controls across these compatible models.
Absolutely. The velcro port openings allow full access to all charging and discharging ports without removing the cover. You can connect solar panels, charge devices, and run appliances while your power station stays protected inside the bag.
The cover bag carries an IP54 rating when fully closed, meaning it protects against water splashes from any direction. For heavy, sustained rain, keep the velcro flaps closed for maximum protection. The rubber feet also elevate the unit off standing water on the ground.
This is an official Anker accessory, not a third-party product. Using the Anker SOLIX Cover Bag won't affect your power station's warranty. The bag itself carries a 3-month warranty from Anker.
The key advantage is custom fit. Generic cases are designed to accommodate multiple brands and sizes, resulting in compromised port access and loose fits. This Anker bag aligns precisely with C800/C1000 port locations and dimensions, providing superior protection and functionality.
Yes, there's a dedicated compartment for storing charging cables and small accessories. This keeps everything organized in one place instead of scattered across multiple bags. Still have questions? Contact our power specialists before you order.
The Anker SOLIX C800X & C1000X Cover Bag includes a 3-month manufacturer warranty covering defects in materials and workmanship. As an official Anker accessory purchased from an authorized dealer, you receive full warranty support and confidence that you're getting a genuine product.
Order from Mighty Generators, an authorized Anker dealer, for full warranty coverage, expert support, and fast shipping.
Questions? Our power specialists are here to help. Contact us before or after your purchase for compatibility confirmation, accessory recommendations, or any other questions about protecting your Anker SOLIX power station.
Use our free Generator Sizing Calculator. Match wattage, fuel, and runtime to your home or jobsite in 5 minutes.
No spam. Unsubscribe anytime.
