You invested in an Anker SOLIX F3800 to keep your home running during outages. But right now, it's sitting there like an expensive paperweight because you don't have the right cable to connect it to your electrical panel. Every storm that rolls through, every grid flicker, you're reminded that your backup system isn't actually backing anything up yet.
Without the proper connection cable, you're stuck running extension cords through doorways. You're limited to plugging in one appliance at a time. Your whole-home backup dream stays exactly that: a dream. Meanwhile, your neighbors with complete setups keep their lights on, refrigerators humming, and HVAC systems running while you scramble.
The Anker SOLIX Home Power Panel Cable is the exact-fit connector that brings your F3800 system online. This 1.5m cable integrates your portable power station directly with your home's electrical panel, utility grid, and rooftop solar. No guessing about compatibility. No worrying about gauge ratings. Just plug-and-play whole-home backup power.
Generic cables create problems. Wrong connectors. Insufficient gauge. Code violations waiting to happen. The Anker SOLIX Home Power Panel Cable is engineered specifically for the F3800 ecosystem. It matches the electrical requirements precisely, so you're not gambling with your equipment or your home's safety.
This isn't just a power cord. It's the bridge between your F3800 and your entire home electrical system. Connect to your main panel for whole-home backup. Tie into your utility grid for seamless switchover. Link your rooftop solar array for sustainable, self-sufficient power. The cable supports all three integration modes through a single connection point.
Once connected, the Anker app gives you complete visibility into your power flow. Monitor consumption in real time. Set schedules to avoid peak electricity rates. Track solar generation and battery levels from anywhere. The cable enables all the smart features that make the F3800 system genuinely useful, not just powerful.
This cable is designed for set-it-and-forget-it reliability. Heavy-duty construction handles the demands of continuous home backup duty. Whether you're routing it through conduit or running it along your garage wall, it holds up to the environment without degradation. If you need additional charging options for your SOLIX system, the Anker SOLIX AC Charging Cable provides a heavy-duty 1.2m power cord for F and C series units.
See full specifications below for complete technical details.
Not sure if this cable fits your specific setup? Check our FAQs below or contact our power specialists for guidance.
You could try to piece together a connection using off-the-shelf cables from the hardware store. People do it all the time. Some of them end up with systems that don't transfer full power. Others discover their cable doesn't meet code when the inspector arrives. A few learn the hard way that undersized wiring creates fire hazards.
The Anker SOLIX Home Power Panel Cable eliminates all that risk. It's the manufacturer-specified component designed to work with F3800 systems rated for 3,000+ battery cycles. Anker stands behind their ecosystem with proper engineering, not aftermarket workarounds.
When you're building a home backup system that might need to protect your family for a decade or more, proprietary fit matters. This cable is part of that engineered system, not a generic substitute. For mobile charging needs, consider adding the Anker SOLIX Car Charging Cable to keep your system topped off from your vehicle.
| Spec | Value |
| Brand | Anker |
| Model | A17U7111 |
| Product Type | Home Power Panel Cable |
| Cable Length | 1.5 meters (approximately 5 feet) |
| Compatibility | Anker SOLIX F3800 Portable Power Station |
| Integration Support | Home electrical panel, utility grid, rooftop solar |
| Output Support | 120V/240V home backup |
| Port Compatibility | NEMA 14-50, L14-30R (via F3800 system) |
| App Integration | Yes, via Anker SOLIX app |
| Construction | Heavy-duty, professional-grade |
This cable is designed exclusively for the Anker SOLIX F3800 portable power station system. It will not work with other Anker models like the C300 series or with power stations from other manufacturers. The F3800-specific design ensures proper fit and full power transfer capability.
The cable connects your F3800 system to your home's electrical panel, which can then integrate with rooftop solar through your existing solar installation. It's not a direct solar panel connector. For the F3800-to-panel-to-solar pathway, this cable is the essential link that enables solar integration and energy storage.
Once the cable connects your F3800 to your home panel, the Anker app lets you schedule when to draw from grid power versus battery storage. You can program the system to charge during off-peak hours when electricity costs less, then power your home from batteries during expensive peak periods. This automated scheduling can meaningfully reduce your utility bills over time.
While the cable itself is plug-and-play on the F3800 side, connecting to your home electrical panel typically requires a licensed electrician. This ensures proper integration with your existing wiring, compliance with local electrical codes, and safe operation of the complete system. Most homeowners have the panel connection completed in a few hours.
Yes. The F3800 system supports expansion up to 26.9kWh or even 53.8kWh using additional LFP battery packs. This single cable handles the connection between your expanded system and your home panel regardless of how many expansion batteries you add. The cable capacity matches the F3800's maximum output capability.
The cable measures 1.5 meters, approximately 5 feet. This length works well for garage installations where the F3800 sits near your electrical panel. For installations requiring longer runs, you'll need to position your power station closer to the panel or consult an electrician about proper extension options that maintain code compliance. Still have questions? Contact our power specialists before you order.
Your Anker SOLIX Home Power Panel Cable is backed by Anker's standard warranty coverage when purchased from an authorized dealer. This protects your investment against manufacturing defects and ensures you receive genuine Anker components, not third-party imitations.
Order from Mighty Generators, an authorized Anker dealer, for full warranty coverage, expert support, and fast shipping. We stock genuine Anker SOLIX accessories and can help you configure a complete home backup system that fits your specific needs.
Questions? Our power specialists are here to help. Contact us before or after your purchase for installation guidance, compatibility verification, or system planning assistance.
Use our free Generator Sizing Calculator. Match wattage, fuel, and runtime to your home or jobsite in 5 minutes.
No spam. Unsubscribe anytime.
