This is a protective cover accessory designed for use with Pulsar portable generators sold separately. It does not generate power and requires a compatible Pulsar generator to serve its purpose.
A generator left uncovered between uses takes a beating. Sun, rain, dust, and humidity work on it constantly, and by the time you need it most, you're dealing with corroded components, cracked housings, or a unit that simply won't start. That's a frustrating situation when the power's out and your household is counting on you.
The cost of neglect adds up fast. Moisture intrusion can compromise electrical components, UV exposure breaks down plastic and rubber over time, and debris accumulation turns routine maintenance into a real chore. Protecting your investment now is far smarter than repairing or replacing it later.
The Pulsar Large Generator Cover (PGC12A1) is purpose-built to keep your Pulsar portable generator shielded and ready. Designed specifically to fit Pulsar generators in the 5000 to 13000-watt range, it gives you confidence that your equipment is protected whether it's sitting in storage, parked on the jobsite, or waiting out a stretch of bad weather on your back patio.
Pulsar engineered this cover to match the real-world demands that generator owners face. The heavy-duty polyester fabric is the right call here. It's tough enough to resist tears and punctures from everyday handling, yet flexible enough to conform closely to the contours of your generator without trapping condensation underneath.
The waterproof design isn't a surface-level treatment. It's built into the material so rain runs off cleanly without soaking through. The UV resistance works the same way, protecting both the cover itself and the generator underneath from sun damage during long stretches of outdoor storage.
Fit matters more than most people realize when it comes to generator covers. A cover that's too loose flaps in the wind, lets in blowing rain from the sides, and can actually cause abrasion damage over time. This cover's specific sizing for Pulsar's 5000W to 13000W generator lineup means it sits where it should, stays put, and does its job without any fussing.
If you own a Pulsar generator in that wattage range and you're storing it between uses, this cover is the straightforward answer. Browse all generator accessories at Mighty Generators or add this to your order today.
This cover earns its place in a few clear scenarios. If you run a portable generator seasonally, during hurricane season, winter storms, or summer outages, this cover keeps the unit protected during the long stretches when it's not running. Outdoor storage between uses is exactly what it's designed for.
Contractors and tradespeople who haul generators to jobsites and park them outdoors during the workday will appreciate the UV and moisture protection too. And for homeowners who keep their generator on a covered porch or under a lean-to, the added layer of protection against dust, bird debris, and humidity is worth having.
Pulsar's generators represent a significant investment. A cover at this price point is one of the most cost-effective ways to protect that investment and extend the usable life of your equipment. If you're already picking up a Pulsar generator, adding the PGC12A1 to your order is a simple decision. Shop Pulsar generators at Mighty Generators to find your compatible model.
Walk into any hardware store and you'll find generic tarps and universal generator covers that claim to fit everything. In practice, they fit nothing particularly well. They're oversized, they flap in the wind, and they leave gaps that let in exactly the moisture and debris you're trying to keep out.
The Pulsar PGC12A1 is designed by the same brand that builds the generators it covers. The sizing is based on actual generator dimensions, not a rough estimate meant to cover a dozen different makes and models. That matters when you're trying to protect a unit worth several hundred to several thousand dollars.
Pulsar has been a recognized name in portable power for years, and their accessories are held to the same standards as their generators. The heavy-duty polyester construction here isn't an afterthought; it's the same quality-focused approach that Pulsar applies across their product line. When you buy a brand-matched cover, you're getting protection that was actually thought through for your specific equipment.
| Specification | Detail |
|---|---|
| SKU | PGC12A1 |
| Brand | Pulsar |
| Cover Size | Large |
| Overall Dimensions | 31 x 21 x 23 inches |
| Compatible Generator Wattage | 5000W to 13000W (Pulsar portable generators) |
| Material | Heavy-duty polyester |
| Waterproof | Yes |
| UV Resistant | Yes |
| Fit Type | Purpose-fit for Pulsar generators |
The Pulsar PGC12A1 is designed to fit Pulsar portable generators in the 5000W to 13000W range. Its overall dimensions are 31 x 21 x 23 inches. If your generator falls outside that wattage range, check Pulsar's other cover options to find a better match.
The PGC12A1 is built with a waterproof design, not just a water-resistant coating. The heavy-duty polyester material is constructed to shed rain and prevent moisture from soaking through to your generator. This makes it suitable for outdoor storage in rainy climates.
The Pulsar PGC12A1 is well-suited for outdoor storage between uses. The waterproof and UV-resistant construction protects against both rain and sun exposure during extended periods of non-use. For long-term storage, always follow your generator manufacturer's storage guidelines as well, including fuel treatment.
This cover is purpose-built for Pulsar portable generators in the 5000W to 13000W category. It may physically fit generators from other brands with similar footprints, but Pulsar designed and sized it for their own lineup. For the best fit and protection, use it with a compatible Pulsar generator.
The polyester material used in the Pulsar PGC12A1 includes UV-resistant properties that block the sun's rays from degrading plastic housings, rubber components, and painted surfaces on your generator. Prolonged UV exposure without protection can cause fading, cracking, and brittleness over time. This cover addresses that risk during outdoor storage.
If your Pulsar generator is rated between 5000W and 13000W, the PGC12A1 at 31 x 21 x 23 inches is the cover designed for it. For generators below that range, a smaller Pulsar cover would be a more appropriate fit. Still have questions? Contact our power specialists before you order.
The Pulsar Large Generator Cover is backed by Pulsar's manufacturer warranty. For warranty service or product questions, Mighty Generators is here to support you before and after your purchase. Our team knows Pulsar's product line and can help you confirm compatibility, answer technical questions, or point you toward the right accessories for your setup. Buy with confidence knowing you have a knowledgeable team in your corner.
Use our free Generator Sizing Calculator. Match wattage, fuel, and runtime to your home or jobsite in 5 minutes.
No spam. Unsubscribe anytime.
