Pulsar PGD125TiSRCO 12500W Tri Fuel Inverter Generator with CO Sentry
Authorized Dealer
Fast Shipping
Expert Support Before & After Purchase
Financing Available
The Pulsar PGD125TiSRCO 12500W Tri Fuel Inverter Generator with CO Sentry delivers 10,000 watts of continuous, pure sine wave power on gasoline, propane, or natural gas. It's built for people who need serious output without the noise, dirty power, or fuel-source anxiety that comes with conventional generators.

Authorized Dealer
Fast Shipping
Expert Support Before & After Purchase
Financing Available

The inverter output matches the quality of utility grid power, keeping sensitive devices like laptops, medical equipment, and smart appliances safe. You can run your full lineup of modern electronics without a second thought.

Sustaining 10,000 watts continuously and handling 12,500-watt surge loads means this unit can power a home's essential circuits, a large RV, or a demanding job site. It handles heavy-start appliances like air conditioners and refrigerators without flinching.

Tri-fuel flexibility means you're never locked into a single fuel source. Switch between gasoline, propane, or a natural gas hookup depending on what's available, keeping you operational even when supply chains are disrupted.

At 66 dB, this inverter generator runs significantly quieter than a comparable open-frame unit. Conversations happen at normal volume nearby, and you're far less likely to draw complaints from neighbors or campground staff.

The built-in carbon monoxide sensor monitors air quality continuously and triggers an automatic shutdown if CO concentrations rise to a hazardous level. It's an active safety system, not just a warning light.
Wired to the furnace, sump pump, fridge, and lights, quietly and without fumes.
| Load | Supported | Notes |
|---|---|---|
| Central Air Conditioner (5-ton) | Yes | Surge capacity handles the compressor start-up draw |
| Refrigerator / Freezer | Yes | Runs multiple units simultaneously with capacity to spare |
| Sump Pump | Yes | 12,500W surge handles hard-start pump motors |
| Laptops, TVs, and Electronics | Yes | Pure sine wave output is safe for all sensitive devices |
| Power Tools (circular saw, drill, etc.) | Yes | Handles inductive motor loads with headroom to spare |
| Medical Equipment (CPAP, home oxygen) | Yes | Pure sine wave output meets the requirements of most medical devices; verify with your device manufacturer |
| Electric Vehicle Charging (Level 2, 240V) | No | Level 2 EV charging requires dedicated 240V high-current circuits; verify output configuration before attempting |
| Pulsar PGD125TiSRCO 12500W Tri Fuel Inverter Generator with CO Sentry | A conventional open-frame generator at similar wattage | |
|---|---|---|
| Power Output Type | Pure sine wave inverter output | Modified sine wave or unregulated output |
| Safe for Sensitive Electronics | Yes, fully safe for laptops, medical devices, smart appliances | Risk of damage or degradation to sensitive equipment |
| Noise Level | 66 dB at load | Typically 70 to 80+ dB; disruptive at close range |
| Fuel Options | Gasoline, propane, or natural gas | Usually gasoline only |
| CO Protection | Built-in CO Sentry with automatic shutdown | Rarely included; manual carbon monoxide awareness required |
| Continuous Output | 10,000W sustained | Often rated but not sustained at advertised wattage |
| Continuous Output | 10,000W |
| Surge / Peak Output | 12,500W |
| Fuel Types | Gasoline, Propane, Natural Gas |
| Output Waveform | Pure Sine Wave |
| Noise Level | 66 dB |
| CO Protection | CO Sentry with Automatic Shutdown |
| Generator Type | Inverter Generator |
| Brand | Pulsar |
| Model | PGD125TiSRCO |
The Pulsar PGD125TiSRCO runs on three fuel types: gasoline, liquid propane, and natural gas. You can switch between them depending on what's available at your location. This flexibility is especially valuable during extended outages when gasoline may be hard to source locally.
Yes. The PGD125TiSRCO produces pure sine wave output, which matches the quality of standard utility grid power. That makes it safe for laptops, televisions, smart appliances, and most medical devices. If you're running medical equipment, always verify compatibility with your device manufacturer as an additional precaution.
Pulsar rates the PGD125TiSRCO at 66 dB during operation. To put that in context, a normal conversation sits around 60 to 65 dB, and a conventional open-frame generator at similar wattage often runs above 70 to 75 dB. The difference is clearly audible, and 66 dB is quiet enough for campground use and residential areas where noise matters.
CO Sentry is an active carbon monoxide monitoring system built into the generator. It continuously measures CO concentration in the surrounding air, and if levels rise to a dangerous threshold, the generator shuts itself off automatically. This is not just an alarm, it's an automatic response that acts even if no one is nearby to notice a warning.
The 10,000W figure is the continuous output, meaning the load the generator can sustain indefinitely under normal operating conditions. The 12,500W figure is the surge or peak output, which is available for a few seconds to handle the high startup draw of motors in appliances like air conditioners, refrigerators, and pumps. When sizing your load, plan around the 10,000W continuous rating for anything running long-term.
Yes, natural gas is one of the three supported fuel options. Running on a natural gas line eliminates the need to store or rotate fuel, which is a practical advantage for permanent or semi-permanent backup installations. You'll want to ensure your gas supply pressure and line size meet the generator's requirements, which are detailed in the Pulsar owner's manual.
Use our free Generator Sizing Calculator. Match wattage, fuel, and runtime to your home or jobsite in 5 minutes.
No spam. Unsubscribe anytime.